Tweet
I have a 2014 Etec 15 Hp HO. Tired of having to climb up in the boat to raise my kicker. I have large blue and green wires going to my motor with another set of smaller blue, green and white w/brown stripe running next to it. My trim only has a blue, green and red wire. Any help would be appreciated.
-
-
You have to extend the wires at trim switch(red,blue and green) or from trim relay but if splicing into trim relay wires make sure you use the small blue and green wires. -
So the larger green/blue wires should not be touched. I just need to tap off the smaller wires going to the trim relay, specifically the white/ brown signal to my red, black to my blue and green to my green?
In my photo you can see the trim switch I want to add, red, green and blue wire. Wires from the relay, green grounded to motor, white with brown, green and black.
Comment
-
Comment