Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

2004 200 water temp alarm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2004 200 water temp alarm

    I am having a high water temperature issue with a 2004 200 DFI. the water temp alarm only comes in at higher RPM 2500 or above then the engine goes into SLOW. The light clears after a few minutes of idle speed. I have replaced the high temp switch and the pressure valve. The water pump has been replaced and there is strong indicator stream. I would like to solve this before I winterize the Engine. The code from the alarm is 22 or starboard side temperature switch (no codes from the port side). Should I replace the thermostat on the starboard side.

  • #2
    Have you check your starboard thermostat?
    Regards
    Boats.net
    Evinrude Outboard Parts

    Comment


    • #3
      Problem is fixed

      The grommet at the top of the water pump was placed in the wrong way, upside down for this Engine causing a blockage of water flow.

      Comment

      Working...
      X