Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

74 15hp

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 74 15hp

    Having problems with 74 15 hp motor. Starts great, smokes and seems to have a miss. Pull #1 plug wire and engine smooths out. Pulled access panel and notice #1 piston had small gouge. Is this a rings problem or a coil problem? Looking for answers. Cant find them on the internet.

  • #2
    I would run a compression test on it first and see what kind of readings you get. When you say that it smooths out with one pulled I think of spark jumping between the two wires firing partly on both. Maybe the points are way off?

    Comment


    • #3
      15 Hp is only 2 cylinder right? When you pull #1 and say it smoothes out, I would think it is smoother because it is only running on one cylinder and you have basically eliminated what ever problem is present on #1 causing it to "mis"

      I would check compression like suggested by high country, if it checks out (with in 10-15% of each other) then start checking your spark


      Let us know what you find :-)

      Comment


      • #4
        checked compression and both are the same. thinking it may be the plug wire coil. when I said it smoothed out, what I ment was it stopped cutting out and ran continous without cutting.

        Comment

        Working...
        X