E120TLERC- New Carb body missing large br*** tube under carb throat

[jimbobcooter]

Hello,
I am replacing a carb body on my 94 E120TLERC and noticed that the new replacement (part # 0436950) was missing a large br*** tube. If you are looking at the face of the carb body the air jets are off to the left and directly below the throat there is a big br*** tube (I ***ume high speed air). My old carb has one and new carb is missing the tube. There is just a hole in the plastic. Do I need to transfer this br*** tube from the old carb to the new carb? Is it pressed in? How do I remove it without damaging the old carb or the br*** tube?

I looked on the part diagram and there is no part # or identification of this br*** tube which makes me think it should be part of the carb body...Evinrude says it is not.

Any help is appreciated.

[boats.net]

I don't have one here to look at to see if I can tell what carb circuit it is but normally but you don't have to remove parts off of old carb to put on new one.