1984 Evinrude VRO wiring

[paphunt]

Help, I own a 1984 Evinrude model #E150STLCR XP150 motor. I'm upgrading the original VRO (which has no wires connected to it) to a new JOHNSON/EVINRUDE VRO FUEL / OIL PUMP PART # 5007423 that has a (4)wire harness connected to it. Also purchased a New OMC Evinrude Johnson Cable 174710 or 0174710 that the salesman said I must get to connect the new VRO to the wiring on my motor. My problem is that I don't have a diagram to view that will show me how to connect the OMC Evinrude Johnson Cable 174710 or 0174710 electric wires to my motor wiring harness. On one end of the 174710 cable there's a connector that will plug into the VRO FUEL / OIL PUMP PART # 5007423, but no information or diagrams to show me where to connect the wires at other end of the Cable or harness #174710. Thanks guys

[tony edwards]

tony edwards

you should have a new purple wire. it needs to be tied into the harness to any purple wire. all id does, is add 12 volts to the vro pump. all purple wires on engine are the same. so go catch a fish.