Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

Evinrude 25hp

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Evinrude 25hp

    I just bought a 1973 Evinrude 25hp tiller motor. It starts right up but goes 90mph. I can't throttle it down with the handle. Last week I tried putting it in gear to slow it down and sheared the pin. I had it serviced and it appeared to be acting normal. This morning it did the same thing. I did not engage the gear but hit the kill button. I started it 8 or 10 times and each time it was full speed rpm s. I feel this something minor out of adjustment but I don't know where to look. Two fishing trips ruined. HELP!

  • #2
    Either throttle is stuck at full throttle or have an air leak in intake or crankcase causing it to run too lean.
    Regards
    Boats.net
    Evinrude Outboard Parts

    Comment


    • #3
      If the throttle is stuck, how do I relieve it and keep it from repeating? I have the cover off. Thanks for the response and help.

      Comment


      • #4
        If the throttle is stuck, how do I relieve it and keep it from repeating? I have the cover off. Thanks for the response and help.

        Comment


        • #5
          Will someone please tell me WHERE the stuck throttle is. It is one thing to tell me what the problem might be but quite a bit more helpful to tell me WHERE and HOW to fix it.
          I have the cover off and as I shift the throttle handle things seem to be working properly.
          VERY FRUSTRATED!

          Comment

          Working...
          X