Tweet
Hey guys, I have a 1999 Evinrude Ficht 115 E115FSLEEN. I recently replaced the lower unit and when I went to start the engine up I got a check engine light. I shut it off and restarted it and the same thing happened.
I retrieved the codes according to the service manual. They were illuminated as follows:
43 WT Circuit Above expected range
22 WT Switch Activation
26 Battery voltage below expected range
16 Crank Sensor misadjusted or damaged.
The boat was run last on this previous Sunday so I am thinking it was something I did during removal and installation. I would also like to note that I have been having extremely hard cold starts, but once the engine is warm it starts up just fine.
Any help would be appreciated, I'm kind of at a loss.
I retrieved the codes according to the service manual. They were illuminated as follows:
43 WT Circuit Above expected range
22 WT Switch Activation
26 Battery voltage below expected range
16 Crank Sensor misadjusted or damaged.
The boat was run last on this previous Sunday so I am thinking it was something I did during removal and installation. I would also like to note that I have been having extremely hard cold starts, but once the engine is warm it starts up just fine.
Any help would be appreciated, I'm kind of at a loss.