I have a 1975 / 135 HP Strangler, serial number 135543E, that starts, idles and runs great, but....
Looking at the motor standing behind the boat it only runs on the right two cylinders at idle, I have to very slowly increase the throttle until the left side cylinders fire. This is tested in the water.
At idle I am 4 degrees TDC and at full throttle I am at 20 degrees TDC. I replaced the power pack, one bad coil, the spark plugs and wires. Any ideas?
Looking at the motor standing behind the boat it only runs on the right two cylinders at idle, I have to very slowly increase the throttle until the left side cylinders fire. This is tested in the water.
At idle I am 4 degrees TDC and at full throttle I am at 20 degrees TDC. I replaced the power pack, one bad coil, the spark plugs and wires. Any ideas?
Comment