Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

150 fitch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 150 fitch

    150 fitch
    when cranking check engine light comes on and warning horn. engine will idle but go above idle. Stuck in SLOW mode.

    pulled codes 15 and 35. Any troubleshooting advise. I have heard change the TPS sensor and other say send in your ECU.

  • #2
    May have a wiring problem since throwing both codes.
    Regards
    Boats.net
    Evinrude Outboard Parts

    Comment


    • #3
      okay i checked the wiring for the tps sensor. all three wires are good. I installed a new oil pressure switch and the code 35 is gone. I still have code 12 and 13. installed a new tps sensor and still same codes and same issue. rechecked wiring it is good. Only thing I can think of is the ECU. Since its sends voltage to the tps and receive voltage. What do does everyone think. I need help and fast for any other ideas. I have a tournament in 3 weeks. Should I send out to DFI for repair or just get another ecu of ebay that is in good working condition.

      Comment


      • #4
        That would be next step, if TPS and wiring checks good.
        Regards
        Boats.net
        Evinrude Outboard Parts

        Comment

        Working...
        X