Buy Evinrude Outboard Parts

Announcement

Collapse
No announcement yet.

1997 90hp spl

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1997 90hp spl

    Hi all im new to this site , but do plan on being a regular, anyway I got my 1997 90 spl last year had water pump replaced and a carb tune/clean, by a local shop seems to run ok but not great , starts hard cold , when wormed up starts ok but wants to die about 60 % of the time unless I put it in gear and gas it . At low rpm's it has a miss a strong miss , at wot it seems to run good tops out at 35 mph ( gps ) at about 5300 rpm. its pushing a 1750 Crestliner fish hawk. Ive been told it could be a power pack , Im trying to fix it myself to save money ( don't trust local shop ) model # E90TSLEUA
    Thanks for any help
    Scott
    Last edited by messenger; 08-11-2013, 04:53 PM.

  • #2
    So anyone ???? any help would be great

    Comment


    • #3
      I have a 1981 motor so any advice I have may not be relevant.

      On my motor, I was seeing some of the same symptoms. I replaced all of the fuel lines\etc which helped
      You can bump the idle up which may help the stalling situation.

      My engine was missing and I replaced the 4 coils and 2 powerpacks. Originally I only replaced 2 coils and both powerpacks(boats.net backordered 2 of them) that fixed the high end running and smoothed the idle some.

      I recently received and replaced the other 2 coils. It idles smoother on the muffs now. haven't dropped it back in the water.

      I have a 17 foot Boston Whaler. 35MPH seems in the ballpark for speed but 40 may be achievable. for the Whaler I expect around 40MPH in perfect conditions.

      Some other things to check

      1. All wire connections tight, clean and good wire
      2. Spark Plug wires well seated. New Spark Plugs?

      Comment


      • #4
        thanks for the reply, Ive checked all the wires they seem fine and all connections are tight, I read somewhere that power packs are only last about 10 years on my motor. Im just looking for some help before I throw money at it

        Comment

        Working...
        X