New prop for 200 HO

[Smog10]

I am looking to upgrade props on my 2009 200 hp HO. Motor is on majek illusion. Any suggestions?

[boats.net]

What pitch and diameter are you running now? What are your RPM's and Speed? What are you wanting to accomplish?

[Smog10]

Not sure of pitch or diameter. Model # E200HVLISR 2009. Running 38-39 mph at 4,500ish RPMs. Can run north of 47 mph at 5200 RPMs.

Would like to gain speed. Still need a good hole shot to get up in skinny water.
Where can I find pitch and diameter?

[boats.net]

There should be a number stamped on the propeller with a following P (ex: 17p) The stamped location can be anywhere, depending on prop manufacturer. So you want to increase your speed to 5200 rpm's? Or do you already run 5200 rpm?

[Smog10]

I am currently running 5200 rpms on the top end.
My prop says: 1'+.5 x 19. Not sure what that is but surely someone knows.
Just looking to see if a new prop will help with performance.

[boats.net]

That should actually be 14.5x19, which is a 14.5 diameter by 19 pitch. Your rpm range is 4500-5800. Rule of thumb with propellers are 1p up, decreases acceleration/increases top speed (also drops rpm by 200-300rpm) and visa-versa for pitch down. These are estimates. You are most likely using your optimum propeller. 4blade props help with accel and midrange, but are not top speed props.