Tweet
I have an 81 Evinrude 35 that will momentarily pop out of gear for a split second under load in forward gear. I plan on replacing the clutch dog but everyone says that I should also replace the forward gear. Is it possible to switch the forward and reverse gears when installing the clutch dog? I do not want to have to purchace the forward gear if i don't have to.
-
-
They are not reversable, you will need to purchase the forward gear if it is required. -
motor cable ***embly 1985 50HP evinrude
I am trying to post a question, I realize that this is not the proper way of posting it. if someone can tell me the proper way. however i will post this question:Originally posted by boats.net View PostThey are not reaversable, you will need to purchase the forward gear if it is required.
I have a 50 HP evinrude my motor cable ***embly corroded and detached from the male end nearest the motor. it is not color coded on the motor end, what terminal goes where, or is there a color code for this ***embly that i can use for a guide to let me know what connects to the solenoid and the terminal block..Comment
-
If you are talking about the battery cable, then one goes to the engine block as a ground the other goes to either a solenoid or distribution block.Comment
-
Can the clutch dog be rotated 180 degrees if the front gear side is not damaged?Originally posted by boats.net View PostThey are not reversable, you will need to purchase the forward gear if it is required.Comment
-
The clutch dog uses both of its ends. But in theory yes you can turn it around.Comment
Comment